Tank Removal Services: What Each One Does and Which You Need First
Oil tank removal, underground and aboveground tanks, sweeps, soil testing, remediation and closure in place: what each service covers, when you need it, and how to get quotes.
Get free tank removal quotesUpdated November 12, 2026
Tank removal services cover everything involved in getting rid of an old oil or fuel tank: finding it if you are not sure where it is (a tank sweep), taking it out or, where the rules allow, closing it in place (abandonment), testing the soil around it, and cleaning up the soil if the tank leaked. The company should also handle the permits or notices your town or state requires and give you the paperwork that proves the job was done. Most home heating oil tanks are regulated by states and towns rather than the federal EPA, so the exact steps depend on where the property is.
Every service, in the order jobs usually run
Most residential tank jobs follow the same sequence. You may enter it at any step. A homeowner who already knows where the basement tank is skips the sweep. A buyer whose inspector found a fill pipe in the lawn starts there.
- Find the tank. If nobody knows whether there is a buried tank, a tank sweep scans the property before anyone digs.
- Decide: remove or close in place. Removal is the default in most places. Closure in place is for tanks that cannot practically be dug out, and only where local rules allow it.
- Permits and the utility locate. The contractor files whatever permit or notice your town or state requires and, before any digging, requests a utility markout through 811.
- Empty, clean and remove (or fill) the tank. Remaining oil and sludge are pumped out, the lines are disconnected and capped, and the tank is taken away for disposal or filled with an inert material.
- Test the soil. Soil samples go to a lab. Clean results usually close the job.
- Clean up if needed. If results exceed your state's limits, soil remediation removes the impacted soil and proves the rest is clean.
- Keep the paperwork. Permit, disposal records, lab results, photos and any closure letter. A future buyer, lender or insurer may ask for them.
What each tank service covers
Each service below has its own page with state-by-state listings where our directory has them. Prices depend on the tank, the site and your state, so we don't publish price ranges here. See what drives the cost and get quotes for your property.
Oil tank removal
The full close-out of a heating oil tank: pumping out the remaining oil and sludge, disconnecting and capping the lines, cleaning the tank, and taking it off the property for disposal or recycling. When the tank was buried, it also covers excavation, soil sampling and backfill.
When you need it: You are switching from oil heat, a sale or insurer has flagged the tank, or the tank is old and you would rather deal with it on your own schedule than after a leak.
What you should end up with: Ask for the permit (if your town issues one), the disposal paperwork for the tank and its contents, photos of the empty tank and the excavation, and any lab results.
Oil tank removal: details and listings by state →Underground tank removal
Removal of a buried tank: a utility locate before digging, excavating to expose the tank, pumping and cleaning it, lifting it out, and inspecting and sampling the soil around and under it before the hole is filled.
When you need it: A sweep, an old fill pipe or vent in the yard, or seller disclosures point to a buried tank, or a buyer or lender wants it gone before closing.
What you should end up with: A closure report or letter if your state or town issues one, soil lab results, the excavation photos, and disposal records.
Underground tank removal: details and listings by state →Aboveground and basement tank removal
Pump-out, cutting or disconnecting, and carrying out a tank that sits in a basement, garage or outside on a pad. No digging, so the job is usually faster and simpler than a buried tank, but local permit and disposal rules still apply.
When you need it: You are converting to gas, a heat pump or electric heat, replacing an old tank, or clearing a basement before a sale or renovation.
What you should end up with: Disposal records for the tank and residual oil, and confirmation that the fill and vent pipes were removed or capped so nobody delivers oil into a line that goes nowhere.
Aboveground and basement tank removal: details and listings by state →Tank sweep (tank detection)
A non-invasive scan of the property with ground-penetrating radar, a magnetometer or metal detector, or both, to look for a buried tank before anyone digs. A good report marks what was scanned, what was found and what could not be scanned.
When you need it: Before you buy or sell an older home that may once have had oil heat, before major excavation, or when you see an unexplained pipe in the yard or the basement wall.
What you should end up with: A written report with a site sketch, the instruments used, each anomaly and its approximate location, and the limits of the scan.
Tank sweep (tank detection): details and listings by state →Soil testing
Collecting soil samples around and under a removed tank (or at a suspected leak) and sending them to a lab to check for petroleum. The results decide whether the job is closed or moves on to cleanup.
When you need it: Right after a buried tank comes out, when a tank is closed in place, or when someone suspects a past leak.
What you should end up with: A sample location sketch, the lab report with the chain-of-custody form, and a plain-language summary of what the results mean under your state rules.
Soil testing: details →Soil remediation
Cleanup of petroleum-contaminated soil after a leak: digging out and disposing of impacted soil, more sampling to show the remaining soil meets the cleanup standard, and the reporting your state requires. Groundwater work is a separate, larger step if the leak reached it.
When you need it: Soil results come back over your state limit, oil is visible in the excavation, or a regulator or buyer has asked for a cleanup.
What you should end up with: Disposal manifests for the removed soil, confirmation sampling results, and any no-further-action or closure letter your state issues.
Soil remediation: details and listings by state →Tank abandonment (closure in place)
Emptying and cleaning a buried tank and filling it with an inert material such as sand or foam, leaving it in the ground. It is only an option where state and local rules allow it.
When you need it: The tank sits under a building, a driveway, a large tree or another structure where digging is impractical, and your local rules permit closure in place.
What you should end up with: The permit or approval for closure in place where required, soil sampling results if required, and a record of the fill material. Keep these for a future buyer.
Tank abandonment (closure in place): details and listings by state →Which service do you need?
- Buying or selling an older home and not sure about a tank? Start with a tank sweep. A sweep can miss a tank, so read the report's limits as carefully as its findings.
- Tank found, or you know it's in the yard? Get underground tank removal quotes, and ask each company how it handles soil sampling and what happens if the soil is dirty.
- Tank in the basement or garage? That's aboveground tank removal. If the house ever had an outside fill pipe that doesn't lead to the basement tank, ask about a sweep too.
- Switching from oil to gas, electric or a heat pump? Plan the tank removal with the heating changeover so the old tank isn't left half-full. See oil tank removal.
- Soil results show contamination? You need soil remediation, and possibly a report to your state environmental agency.
- Tank under a building, driveway or addition? Ask whether closure in place is allowed where you live, and what sampling it requires.
Home heating oil tanks vs commercial fuel tanks
The federal underground storage tank rules were written mainly for gas stations and other commercial fuel tanks. EPA's definition of an underground storage tank at 40 CFR 280.12 excludes any "tank used for storing heating oil for consumptive use on the premises where stored," and also excludes tanks in a basement or cellar that sit on or above the floor (eCFR). That describes most home heating oil tanks.
That does not mean anything goes. States, counties and towns fill the gap. Depending on where you live, they may require a removal permit, a licensed or certified contractor, a fire inspector on site, specific soil samples, or a report if contamination is found. A gasoline or diesel tank used by a business is a different job and can fall under the full federal and state UST program. Tell the contractor exactly what the tank held and what it was used for. For the details, read how the EPA heating oil exemption works and contractor licensing by state.
Remove the tank or close it in place?
Removal takes the tank out and lets the soil underneath be inspected directly. Closure in place leaves a cleaned, filled tank in the ground and relies on sampling around it. Some states and towns only allow closure in place when removal isn't practical. Buyers, lenders and insurers may also prefer removal. Ask about both your local rules and the people on the other side of a future sale before you choose. Our guide to oil tank removal vs abandonment walks through the trade-offs.
Choosing a tank removal company
Get more than one quote and compare what is included, not just the total. Questions worth asking every company:
- Which license or certification does my state or town require for this job, and can you show yours?
- Who pulls the permit, and who schedules any inspection?
- Is soil sampling included? Which lab, and how many samples?
- If the soil is contaminated, what happens next, and is that priced separately?
- Where do the tank, the residual oil and any removed soil go, and will I get the disposal records?
- What insurance do you carry, including pollution coverage?
- What paperwork will I have at the end?
More detail is in how to choose an oil tank removal company. Cost depends on tank size and location, access, whether excavation is needed, permit and disposal fees, and the soil results. Our cost guide explains each factor. The only way to get a number for your property is a quote.
Find tank removal services in your state
Rules and the contractors we list change at the state line. Pick your state for its oil tank removal page, or see all service areas.
Tank removal services FAQ
What services does a tank removal company provide?
A tank removal company finds the tank if its location is unknown (a tank sweep), removes it or, where rules allow, closes it in place (tank abandonment), tests the soil around it, and arranges cleanup if the soil is contaminated. Along the way it usually handles the permit or notice your town or state requires, the utility locate before digging, disposal of the tank and its contents, and the closure paperwork you keep. Not every company does every step, so ask which ones are in the quote and which are subcontracted.
What's the difference between tank removal, a tank sweep, and tank abandonment?
A tank sweep only looks for a buried tank with radar or a metal detector; nothing is dug up. Tank removal takes the tank out of the ground or the basement and off the property. Tank abandonment, also called closure in place, empties and cleans a buried tank and fills it with an inert material so it stays in the ground. Abandonment is only allowed where state and local rules permit it, and some buyers and lenders prefer removal.
Do federal EPA rules apply to my home heating oil tank?
Usually not. The federal definition of an underground storage tank at 40 CFR 280.12 excludes tanks used for storing heating oil for consumptive use on the premises where stored, and tanks sitting on or above the floor of a basement or cellar. That is why permits, contractor requirements and soil standards for home heating oil tanks come from your state, county or town instead. Gasoline, diesel and other commercial tanks are a different story and can fall under the federal rules.
Which tank service do I need first?
If you do not know whether there is a buried tank, start with a sweep. If you know where the tank is, start with removal quotes, and ask each company how it handles soil testing. If you already have a soil report showing contamination, go straight to remediation. If the tank cannot be dug out because of a structure, ask whether closure in place is allowed in your town.
Can one company handle removal, testing and cleanup?
Some can, and some subcontract the lab work, the excavation or the remediation. Either can work. What matters is that one written quote lists every step, who does it, and what happens to the price and schedule if the soil results come back dirty.
Sources
- 40 CFR 280.12, Definitions (eCFR): federal UST definition and its heating oil and basement-tank exclusions.
- Call 811: the national call-before-you-dig number for utility markouts.
Get free tank removal quotes
Tell us where the property is, where the tank is (buried, basement or outside), and what you need: a sweep, removal, soil testing or cleanup. We'll pass it to listed contractors who serve your area where our directory has them.
Get free tank removal quotes