Best Oil Tank Removal Companies in New Hampshire (2026)
Short answer: since August 4, 2026, New Hampshire law says a buried tank used only to heat a home has to be removed once you stop using it, under the state fire code, unless taking it out would undermine a structure built over it. NHDES does not register or inspect home heating tanks, so the permit usually comes from your town fire department. Good places to start: Oil Tank Services of NH statewide, Etna Tank Removal on the Seacoast, CommTank in southern NH, and Wilcox & Barton if the tank has already leaked.
By the Tank Removers Editorial Team · Updated November 18, 2026

How we chose
New Hampshire has no state list of residential tank removers, because home heating oil tanks fall outside the state's underground tank rules. So we searched for companies that remove tanks in New Hampshire, read each company's own website, and kept only firms whose sites describe the work and a New Hampshire service area. We say plainly when a firm is mainly commercial or is a consultant rather than an excavator. Each company had to meet at least most of these tests:
- Its own website describes oil tank removal or closure work in New Hampshire, or names New Hampshire towns in its service area
- Says what it handles (permits, pump-out, excavation, disposal, soil checks, paperwork), or clearly that its focus is commercial or consulting work
- Has a New Hampshire office or a stated New Hampshire service area we could read on its own site
- Can deal with a release if one is found, or is clear about who would
- Does not depend on reviews, ratings or testimonials we cannot verify
Nobody paid for placement. We list our own site first because it is a different kind of option (a matching service), and we label it. We did not verify licenses, insurance or complaint history, and we left out one Barrington excavation firm whose status we could not confirm. We did not repeat any company's prices, ratings or customer quotes. Check every fact here with the company before you sign.
At a glance
| Company | Based / area | What we could confirm | Best for |
|---|---|---|---|
| Tank Removers (this is our site) | New Hampshire (matching service) | Free quote matching with participating local contractors; we do not perform removals ourselves | Getting several written quotes from one request |
| Oil Tank Services of New Hampshire (Spencer Bros., LLC) | Statewide; its coverage page says any 603 area code, plus Maine and Massachusetts | A subsidiary of Spencer Bros., LLC; its site says it has worked in New Hampshire since 1983 and does residential and commercial removal, installation and cleaning of aboveground and underground tanks | Homeowners anywhere in the state who want a residential tank specialist, including basement-tank swaps |
| Etna Tank Removal | Brentwood, NH; its site lists Massachusetts and New Hampshire as the service area | Its removal page says the local fire department is present when it removes underground tanks, tanks go to an approved tank yard with permits and a manifest, soil samples can be sent to a certified lab, and a closure report is available on request | Seacoast and Rockingham County homeowners who want a clear, written removal process |
| CommTank | Derry, NH office; headquarters in Wakefield, MA | Lists residential oil tank removal, underground tank removal, tank locating, closure in place, oil spill cleanup and remediation, and a commercial UST removal service across Massachusetts and New Hampshire | Southern New Hampshire jobs that may need locating, closure in place, or a spill cleanup, and commercial or municipal tanks |
| Peniel Environmental | Lists Manchester, Nashua and Concord among New Hampshire service areas; 603 phone number; no street address shown on its site | A dedicated heating-oil tank removal page describing locating, pump-out, excavation or cut-out, soil testing, backfill and closure documentation | Homeowners selling a house who want soil results and paperwork in one package |
| Lakes Region Fuel Systems (Lakes Region Environmental) | Gilmanton, NH | A fuel-system compliance company whose site lists installations, retrofits, replacements and removals, plus federal, New Hampshire and NHDES inspections by an ICC-certified team | Commercial, farm, marina or generator tanks in the Lakes Region that fall under the state tank rules |
| Wilcox & Barton, Inc. | Concord, NH corporate office; offices in Vermont, Massachusetts and Connecticut | An environmental and civil engineering firm whose storage tank page lists tank removal and closure reporting, environmental sampling, and investigations and remediation planning when tanks fail, including help with cost recovery options | A tank that has already leaked, a spill that reached a well or basement, or a buyer who wants an engineer’s report |
Company facts are from each firm's own website, checked November 18, 2026. Services and service areas change; confirm with the company before you sign.
Which kind of company do you need?
| Your situation | What New Hampshire requires | Who to call first |
|---|---|---|
| Basement tank, heating converted to gas or a heat pump | Not an underground tank; have the oil and sludge pumped and disposed of properly; town fire department permit rules vary | A residential tank specialist that cuts out and hauls basement tanks |
| Buried home heating tank you no longer use | Removal under the state fire code (RSA 146-A:21), usually with a town fire department permit and inspection; no NHDES notice for a home heating tank | A removal contractor that pulls the town permit and offers lab soil samples |
| Buried tank under an addition, porch, garage or slab | Closure in place allowed only if removal would undermine the structure (RSA 146-A:21(II)), under the fire code | A firm that does closure in place, after talking to your fire department |
| Oil smell, stained soil, oil in a well or sump | Notify NHDES immediately (RSA 146-A:4 and 146-A:5); cleanup to the department's satisfaction | An environmental consultant, plus a contractor that does spill cleanup |
| Gasoline, diesel, or a commercial heating tank over 1,100 gallons | Likely subject to Env-Or 400 (registration, closure rules) unless an exclusion applies | A fuel-system or commercial tank contractor, with a consultant for closure reporting |
1. Tank Removers (this is our site)
New Hampshire (matching service)
What we could confirm: Free quote matching with participating local contractors; we do not perform removals ourselves.
Best for: Getting several written quotes from one request.
Disclosure: Tank Removers is our own website, not a removal contractor. You describe the tank once (buried or in the basement, its size if you know it, your town) and we try to connect you with participating local pros so you can compare written scopes side by side. Only contractors in our network appear, so the independent firms below are worth calling directly too. Whoever you talk to in New Hampshire, ask who pulls the local fire department permit, whether soil under the tank will be sampled, and what happens if oil is found.
Source: How it works
2. Oil Tank Services of New Hampshire (Spencer Bros., LLC)
Statewide; its coverage page says any 603 area code, plus Maine and Massachusetts
What we could confirm: A subsidiary of Spencer Bros., LLC; its site says it has worked in New Hampshire since 1983 and does residential and commercial removal, installation and cleaning of aboveground and underground tanks.
Best for: Homeowners anywhere in the state who want a residential tank specialist, including basement-tank swaps.
This is the New Hampshire arm of Spencer Bros., the same company that appears on our Maine list. Its removal page describes removal, installation and cleaning of aboveground and underground storage tanks, plus removal of boilers, propane tanks and furnaces, with service 24 hours a day. The coverage page is unusually plain: if your phone number has a 603 area code, it says it can help, with no regional limits. The Spencer Bros. site lists underground removals from small residential tanks up to large commercial ones and basement tank removal and replacement. The sites describe the company as OSHA certified and in good standing with NHDES; we did not verify that. What we could not find is a written description of soil sampling or closure paperwork, so ask for both in the quote.
Source: company website
3. Etna Tank Removal
Brentwood, NH; its site lists Massachusetts and New Hampshire as the service area
What we could confirm: Its removal page says the local fire department is present when it removes underground tanks, tanks go to an approved tank yard with permits and a manifest, soil samples can be sent to a certified lab, and a closure report is available on request.
Best for: Seacoast and Rockingham County homeowners who want a clear, written removal process.
Etna is the most specific of the residential firms about its process. For underground tanks, its page says it makes sure the local fire department is present, lets the fire prevention team inspect the tank after it is pulled, transports the tank to an approved tank yard with permits and a manifest, can collect soil samples under each tank for a certified lab, backfills with clean compacted material, and can submit a closure report on request. It also replaces basement tanks and says it installs single-wall and double-wall brand-name tanks, and it lists seven-day hours with emergency service. Two things to pin down: the soil samples and the closure report are both described as optional, so put them in the written scope if you want them, and ask who would handle a cleanup if the samples come back dirty.
Source: company website
4. CommTank
Derry, NH office; headquarters in Wakefield, MA
What we could confirm: Lists residential oil tank removal, underground tank removal, tank locating, closure in place, oil spill cleanup and remediation, and a commercial UST removal service across Massachusetts and New Hampshire.
Best for: Southern New Hampshire jobs that may need locating, closure in place, or a spill cleanup, and commercial or municipal tanks.
CommTank is a larger tank contractor with both residential and commercial service lines. Its underground removal page describes the full process (site evaluation, permitting, pump-out, cleaning, excavation, disposal, soil screening, restoration and closure documentation) and names Manchester, Nashua, Salem, the Seacoast and Concord in its New Hampshire service area. Its residential menu separately lists oil tank removals, tank pump-outs, underground tank locating, closure in place and oil spill cleanups, which matters in New Hampshire because a tank under an addition or porch is the one case where the new law allows closure in place. The underground removal page is written mostly for commercial, municipal and institutional sites, so a homeowner should ask for its residential team specifically.
Source: company website
5. Peniel Environmental
Lists Manchester, Nashua and Concord among New Hampshire service areas; 603 phone number; no street address shown on its site
What we could confirm: A dedicated heating-oil tank removal page describing locating, pump-out, excavation or cut-out, soil testing, backfill and closure documentation.
Best for: Homeowners selling a house who want soil results and paperwork in one package.
Peniel is a general remediation company (mold, water, fire, asbestos) that also has a tank removal page. That page lays out a five-step process: locate the tank and pull permits, pump and clean out residual oil and sludge, excavate or cut out the tank and haul it as regulated waste, sample the surrounding soil, then backfill and hand over closure paperwork. It also says it works to a closing date when a tank turns up during a sale, and that scope and price are agreed in writing before work starts. Because the site lists service areas across six states but no office address, ask where the crew is based, whether the tank work is done by its own staff or a subcontractor, and which lab runs the soil samples.
Source: company website
6. Lakes Region Fuel Systems (Lakes Region Environmental)
Gilmanton, NH
What we could confirm: A fuel-system compliance company whose site lists installations, retrofits, replacements and removals, plus federal, New Hampshire and NHDES inspections by an ICC-certified team.
Best for: Commercial, farm, marina or generator tanks in the Lakes Region that fall under the state tank rules.
Lakes Region Fuel Systems works mainly on regulated fuel systems: distribution of parts, compliance inspections (annual, triennial and NHDES), upgrades and aviation fueling. Its upgrades section lists removals alongside installations and retrofits. That makes it a strong fit when the tank is not a simple home heating tank, for example a commercial heating oil tank over 1,100 gallons or a gasoline or diesel tank that is subject to Env-Or 400. For a single home tank, ask whether it schedules residential removals; it may refer you elsewhere.
Source: company website
7. Wilcox & Barton, Inc.
Concord, NH corporate office; offices in Vermont, Massachusetts and Connecticut
What we could confirm: An environmental and civil engineering firm whose storage tank page lists tank removal and closure reporting, environmental sampling, and investigations and remediation planning when tanks fail, including help with cost recovery options.
Best for: A tank that has already leaked, a spill that reached a well or basement, or a buyer who wants an engineer’s report.
Wilcox & Barton is not an excavation contractor for routine home tanks. It is a consulting firm, and its storage tank management page says it designs, permits and oversees tank projects, writes tank removal and closure reports, and, when tanks fail or release, conducts investigations, plans remediation and assists with access to cost recovery options. In New Hampshire that last part matters, because a heating oil release may be eligible for reimbursement from the state Oil Discharge and Disposal Cleanup Fund, and the paperwork is easier with a consultant who knows NHDES. Its page is written mostly for fuel distributors, gas stations and industrial sites, so call the Concord office and ask whether it takes residential heating oil cases.
Source: company website
What New Hampshire law says about home heating oil tanks
A new removal rule as of August 4, 2026. The legislature added a short subdivision on residential heating oil underground storage tanks to RSA chapter 146-A (2026, 122:1). RSA 146-A:20 defines the tank as an underground storage tank used solely for heating a residential building. RSA 146-A:21 says that tank shall be removed, in accordance with the state fire code, if a change in the heating system removes it from use or if the owner does not intend to use it in the future. Before this law, New Hampshire relied mostly on NHDES recommendations for home tanks.
One exception for closure in place. A tank that has to come out may instead be permanently abandoned by closure in place, again under the fire code, if removing it would undermine the integrity of an overlying structure. NHDES fact sheet WMD-REM-22 describes what a proper closure involves: removing all product, liquid and sludge from the tank and piping, testing the tank for explosive vapors and making it vapor-free, and filling it with an inert material such as sand or cement so that no voids remain or develop as the fill settles.
Why NHDES is not on the permit. The state's underground storage tank rules, Env-Or 400, exclude any tank facility used solely for heating a residential building, and any facility where no tank is larger than 1,100 gallons and every tank stores heating oil for on-premise heating (Env-Or 401.03). So a typical home tank has no NHDES registration, closure notice or closure report. The removal is governed by the fire code, which RSA 153:1 VI-a defines as NFPA 101 and NFPA 1 (2024 editions) as amended in New Hampshire, including the other codes they refer to.
The town permit is the practical step. Fire departments handle tank removal permits locally. Pelham's notification form becomes the permit once the fire inspector signs and stamps it, and it asks the contractor for its New Hampshire license and certification numbers, a Dig Safe number, the final disposal location with manifest numbers, a site layout and a site safety plan that covers vapor control and a combustible gas indicator on site. Hollis says all oil tank installs and removals are inspected by its fire department, and Gilford uses a combined tank removal and installation permit. Your contractor should know your town's form.
If oil has leaked. The new law says a discharge discovered during removal or closure in place is subject to RSA 146-A:4 and 146-A:5. Those sections require that NHDES be notified immediately when oil may pollute surface water or groundwater, and that whoever is responsible contain or remove the discharge to the department's satisfaction. NHDES's 2005 fact sheet recommends a soil sample from beneath the tank, analyzed by a certified laboratory, at every closure. For questions about home heating oil tanks, NHDES fact sheet REM-6 lists the Oil Remediation and Compliance Bureau at (603) 271-3899.
Selling the house. RSA 477:4-d now requires the seller of a one-to-four-family property to disclose in writing, before or during the preparation of an offer, information about the presence of a residential heating oil underground storage tank, and the buyer signs to acknowledge it. Expect buyers' attorneys to ask for removal paperwork and soil results.
Help with costs. RSA 146-D:6 lets owners of on-premises-use heating oil facilities who demonstrate financial need apply to the Oil Discharge and Disposal Cleanup Fund for reimbursement of underground tank removal or abandonment costs, up to a statutory cap, and for reimbursement of eligible cleanup costs after a release, after a small initial owner share. The fund is excess over any valid insurance, and new tanks and repairs are not eligible. NHDES also runs the Safetank program for income-qualified homeowners. Ask NHDES about eligibility before the work starts.
Questions to ask every New Hampshire contractor
- Is my tank buried, partly buried, or a basement tank that sits on the floor?
- Who pulls the fire department permit, and will the inspector be on site when the tank comes out?
- Is the tank under anything built over it? If you recommend closure in place, why can't it come out?
- Who pumps the remaining oil and sludge, and where do the tank and the waste go? Will I get the manifest?
- Will you remove the fill, vent and supply lines?
- Will you take a soil sample from under the tank and send it to a certified lab, and do I get the results in writing?
- What happens, and who calls NHDES, if you find oil? Can you do the cleanup or will you bring in a consultant?
- What restoration (lawn, driveway, steps) is in the quote, and what if you hit ledge or frozen ground?
What drives the cost (we don't publish prices)
- Buried versus basement tank, and the tank's size and depth
- Ledge, frost and access for equipment, and what has to be restored
- How much oil and sludge has to be pumped and disposed of
- Fill, vent and supply lines that come out
- The town permit and inspection
- Optional soil samples and lab analysis, and a written closure report
- Contaminated soil, if any, and how far it extends
See also: New Hampshire oil tank removal guide, tank sweeps in New Hampshire, removal vs. abandonment, signs a buried tank is leaking, how to choose a tank company, and our lists for Massachusetts and Maine.
Frequently asked questions
Who is the best oil tank removal company in New Hampshire?
There is no official ranking. On our criteria: Oil Tank Services of NH (Spencer Bros.) for a residential specialist anywhere in the state; Etna Tank Removal on the Seacoast and in Rockingham County if you want a clearly written process with fire department inspection, optional lab soil samples and a closure report; CommTank in southern New Hampshire for jobs that may need locating, closure in place or a spill cleanup; Peniel Environmental if you are selling and want soil results and paperwork in one package; Lakes Region Fuel Systems for regulated commercial tanks; and Wilcox & Barton when a tank has already leaked. Get at least two written scopes.
Do I have to remove a buried heating oil tank in New Hampshire?
Often, yes, since August 4, 2026. RSA 146-A:21 says a residential heating oil underground storage tank shall be removed, in accordance with the state fire code, if a change in the heating system takes it out of use or the owner does not intend to use it in the future. RSA 146-A:20 defines that tank as an underground storage tank used solely for heating a residential building. If you still heat with the tank and plan to keep using it, the removal requirement is not triggered, although NHDES has long recommended removing old bare steel tanks.
Can I fill the tank with sand or foam and leave it in the ground?
Only in one situation under the new law. RSA 146-A:21(II) allows a residential heating oil tank that must be removed to be permanently closed in place, under the state fire code, if removing it would undermine the integrity of an overlying structure, such as an addition, porch, garage or slab built over the tank. A tank under open lawn or a driveway does not fit that exception on its face. Ask your local fire department before you plan a closure in place.
Do I need a permit, and from whom?
Usually from your town fire department. The state fire code (RSA 153:1 VI-a adopts NFPA 1 and NFPA 101 by reference, along with the codes they refer to) is enforced locally, and many towns publish their own tank removal permit. Pelham’s form, for example, acts as the permit once the fire inspector signs it and asks for the removal contractor, a Dig Safe number, the disposal location with manifest numbers and a site safety plan. Hollis says all oil tank installs and removals are inspected by its fire department, and Gilford has a combined tank removal and installation permit. Call your fire department first.
Does NHDES need to be notified before a home tank comes out?
Not for a tank used only to heat a house. Env-Or 401.03 excludes from New Hampshire’s underground storage tank rules any facility used solely for heating a residential building, and any facility where no tank is over 1,100 gallons and all tanks hold heating oil for on-premise heating. That is why there is no NHDES registration, closure notice or closure report for a typical home tank. NHDES does need to hear from you immediately if oil has been released (RSA 146-A:4 and 146-A:5).
Is soil testing required?
Not by a rule we could find for a home heating tank, but NHDES fact sheet WMD-REM-22 recommends it: collect a soil sample from beneath the tank, have a certified laboratory analyze it for petroleum, and notify NHDES immediately if contamination is found. The new law adds that any discharge found during removal or closure in place is subject to the state’s spill notification and cleanup statutes. If you plan to sell, a lab result in writing is usually worth having.
Do I have to tell a buyer about the tank?
Yes. RSA 477:4-d, as amended effective August 4, 2026, requires the seller of a one-to-four-family property to disclose in writing, before or during the preparation of an offer, information about the presence of a residential heating oil underground storage tank. The buyer signs a copy to acknowledge receipt.
Is there state money to help pay for removal or a cleanup?
Possibly. RSA 146-D:6 lets owners of on-premises-use heating oil facilities who demonstrate financial need apply to the Oil Discharge and Disposal Cleanup Fund for reimbursement of underground tank removal or abandonment costs, up to a cap set in the statute, and lets owners apply for reimbursement of eligible cleanup costs after a release, minus a small initial owner share. NHDES also runs the Safetank program for income-qualified homeowners. Ask NHDES about eligibility before work starts, and keep every invoice and lab report.
How much does oil tank removal cost in New Hampshire?
We do not publish price ranges. Cost depends on whether the tank is buried or in the basement, its size and depth, ledge, frost and access for equipment, how much oil and sludge has to be pumped, the fill, vent and supply lines, the town permit, any soil samples, and what restoration is included. Compare itemized written quotes.
Sources
- RSA 146-A:20 and RSA 146-A:21 (2026, 122:1, effective August 4, 2026)
- RSA 146-A:4 (notification; removal) and RSA 146-A:5 (duty to report)
- RSA 477:4-d (seller disclosure, amended 2026, 122:2)
- RSA 146-D:6 (Oil Discharge and Disposal Cleanup Fund eligible expenses)
- RSA 153:1 VI-a (state fire code definition)
- NHDES, Env-Or 400 Underground Storage Tank Facilities (Env-Or 401.03 exclusions)
- NHDES fact sheet WMD-REM-22, Recommended Practices for Closure of Residential Heating Oil Underground Storage Tanks (2005; copy hosted by InspectAPedia)
- NHDES fact sheet REM-6, Self-Inspection Checklist for Basement and Outdoor Home Heating Oil Tanks (2020)
- Town fire department forms: Pelham, Hollis, Gilford
- Company facts: each firm's own website where linked above, checked November 18, 2026.
Get written quotes to compare
Describe your tank once and we'll try to match you with participating contractors near you. Free, no obligation, and every quote is yours to compare.
Get free quotes →